|
- Descriptions:
- The product CCFL I26-350,is designed as the light source for backlight module of 1 7"LCD monitor, and its color chromaticity are set ad X=0.30±0.0 1; Y=0.285±0.01.
Lighting principles:
Clio's CCFL is made of miniature hard-glass tube, which spread with high-performance Tri-color fluorescent powder on inner surface and filled in idle-gad & less of mercury vapour, when powered it on, the gas was dissociated to stimulate the mercury vapour and emission out 253.7nm ultra-violet rays, and then changed to visible light when passed through fluorescent coating layer.
- Product Characteristics:
- High luminance & efficiency, low power consumption, small size and long life.
- Good impact absorbability, start ability & Repeatability
- Can be instantly started on under 0.1 Lx illuminations.
- Color temperature Tri-colors can be adjusted on customer's requirements.
- Applications:
- LCD monitor back-light source.
- Ambient conditions for applications:
- For operation:
Themperature: 0~60 °C
Relative humidity: 20~90%
No condensation or iced on lamp surface.
- For storage: ~p
Temperature: -30~70 °C
Relative humidity: 5~90%
No condensation or iced on lamp surface.
- Notices:
- Don't bend both-ends electrodes, or it may influence vacuum characteristics and break-down the lamp.
- Don't bend, curve or shock on lamps or it may be broken.
- It may be shorten average life when using lamps in low temperature
(< 0 °C ) environments.
- For preventing electric-shock, don't touch both-ends electrodes of lamps while power it on.
- When welding wire to electrode, should be finished in a short time for preventing overheat and breakage of lamps.
- Don't look at lamp for a long time when lighting, or it may hurt eyes.
|
|
|
|