< Back • Next >
Testing instruments and conditions:
Testing instruments:
  • Mili-ampare meter: INSTEK GDM-8246A
  • RMS meter: INSTEK GDS820C
  • High-voltage probe: TEK P6015A
  • Luminance meter; TOPCON BM-7

Testing conditions:
  • Temperature:25±2 °C
  • Relative humidty:65%±20%(no wind)
  • Start testing after lighting 5 minutes.

Notices:
  • Don't mis-connecting the positive/negative poles of inverter.
  • Don't touch instruments while on, testing.
< Back • Next >
©2003 Clio Technologies, Inc. All Rights Reserved 1810 Eber Rd Suite C2
Holland, Ohio 43528 •419-868-7290 • Fax 419-868-7291